基于DEM-CFD耦合的气吸式排种器仿真研究     

张凯  洪杨  徐祝欣 《南京气象学院学报》2020,12(6):767-772

为提高大白菜等小粒径精密播种机的机械化水平,设计了一种小粒径气吸式排种器.首先利用JPS-12排种器性能检测试验台对排种器进行测试,得到不同参数组合下的性能指标与最优参数组合.然后使用计算流体力学方法（CFD）,借助FLUENT软件分析了吸种器内部流场的分布,得到了吸种器内部压力分布云图和吸种孔截面云图.最后基于离散元法（DEM）建立大白菜种子颗粒模型,对排种器仿真模型进行简化和网格划分,完成了小粒径气吸式排种器DEM-CFD耦合仿真实验.对比台架与仿真试验结果,得出如下的结论：当排种盘转速为20 r/min,真空度为2.2 kPa时,排种性能最佳.  相似文献   

WILD PPO-8制作正射影象图的实时控制     

吕绍裘  吴正春 《地球科学与环境学报》1988,(2)

本文从倾斜象片与水平象片的透视关系出发,考虑A_8精密立体测图仪的转角系关,导出了模拟计算机比例尺缩放和影象旋转改正公式和实际运算公式,进而阐述了PPO-8正射投影装置是如何实现对ZOOM系统和DOVE系统两个基本公式的控制。  相似文献   

基于多GPU的Harris角点检测并行算法     

肖汉  周清雷  张祖勋 《武汉大学学报(信息科学版)》2012,37(7):876-881

提出了一种基于多图形处理器(graphic processing unit,GPU)设计思想的Harris角点检测并行算法,使用众多线程将计算中耗时的影像高斯卷积平滑滤波部分改造成单指令多线程(single instruction multi-ple thread,SIMT)模式,并采用GPU中共享存储器、常数存储器和锁页内存机制在统一计算设备架构(com-pute unified device archetecture,CUDA)上完成影像角点检测的全过程。实验结果表明,基于多GPU的Har-ris角点检测并行算法比CPU上的串行算法可获得最高达60倍的加速比,其执行效率明显提高,对于大规模数据处理呈现出良好的实时处理能力。  相似文献   

利用C波段转发数据实现GEO卫星轨道确定     

毛悦  宋晓勇  贾小林  吴显兵  冯来平 《测绘科学技术学报》2012,29(3):175-178

为了提高我国卫星导航系统GEO卫星定轨能力,针对我国卫星导航系统所特有的新数据和新方法,利用CAPS系统的C波段转发式测距数据进行了单GEO卫星定轨实验.在分析该方法技术特点的基础上,从定轨残差和轨道重叠弧段比较等方面,对定轨结果进行了分析.由于设备转发时延是影响该方法定轨精度的重要因素,因此同时还分析了系统偏差对定轨精度的影响,得出了一些有益的结论.  相似文献   

A model test system with a dynamic load device for geotechnical engineering in cold regions     

ShuPing Zhao  Wei M  GuiDe Jiao  Fei Luo 《寒旱区科学》2012,4(2):0115-0120

A model test system with a dynamic load device for geotechnical engineering in cold regions is presented. This system consists of a model test tank, a refrigeration device and temperature controller, a dynamic load device, together with sensors and data loggers for detecting stress, deformation, and temperature changes. The system can accommodate soil blocks up to 3 m in length, 2.5 m in width, and 1 m in height. The lowest temperature provided by the refrigeration device is -20 °C. The maximum load provided by the dynamic load device is 100 kN and the vibration frequency of the dynamic load can range from 0.1 to 10 Hz. A number of waveforms, such as sine waves, rectangular waves, triangle waves, and other user-defined waves can be generated by the dynamic load device controller.  相似文献   

机载粉剂催化剂播撒设备的研制及其在奥运和残奥消云中的应用     

金华  张蔷  何晖  马新成  黄梦宇  田海军  刘力威 《气象》2012,38(11):1443-1448

人为引发的下沉气流可以抑制对流云的发展,这一现象已在试验中得到验证。用“人工下沉气流法”实施人工消云试验时,需在云顶大剂量的播撒粉剂催化剂。北京市人工影响天气办公室研制了能完成此类大剂量播撤任务的设备,并通过外场飞行试验对设备进行检验和改进。这是国内人工影响天气领域首个采用空投播撒法的粉剂催化剂播撤设备;可减少催化剂对飞机和播撤设备的污染。分析发现,新设备能够满足人工消云作业中播撒大剂量粉剂催化剂的需要。该设备在北京奥运会、残奥会开闭幕式当日的消云试验作业中投入使用,共实施消云飞行作业9架次,累计利用新设备播撒吸湿性粉剂催化剂34吨。  相似文献   

野外组装可移动式防直击雷装置的研究   总被引：1，自引：1，他引：0  

高燚  潘家利  石保平 《气象研究与应用》2008,29(3):55-57

通过对9m×9m的实际接地网进行计算,对于二类和三类防雷建筑物,可以应用当环形接地网的等效面积大于78.5m2后,采取不计接地网接地电阻的设计方法来实现野外可移动式接地网设计,并将避雷针和避雷线组合的接闪器设计成标构件,方便组装,实现野外组装可移动式防直击雷装置.  相似文献   

Modifications of resonant column and torsional shear device for the large strain     

Yoon-Shin Bae  James A. Bay 《Computers and Geotechnics》2009

Conventional RC/TS (resonant column and torsional shear) devices use a specimen with an aspect ratio (height-to-diameter) of 2:1 and this generates a maximum shear strain in the sample of about 1.5% at the maximum rotation of the driving system. The objective of this study is to modify the RC/TS device to generate higher strain amplitude. The modifications include a new base pedestal to overcome the limitations in the travel of the drive system and modification of the coil wiring to increase torque. The effects of the new coil wire on torque in the electromagnetic drive system were evaluated and the application of the modified device was illustrated using sand soil.  相似文献   

Stress Measurement by Overcoring at Shallow Depths in a Rock Slope: the Scattering of Input Data and Results   总被引：1，自引：0，他引：1  

C. Clément  V. Merrien-Soukatchoff  C. Dünner  Y. Gunzburger 《Rock Mechanics and Rock Engineering》2009,42(4):585-609

This paper describes a field experiment of stress measurement using the overcoring method performed in a rock slope, called Rochers de Valabres (located in France’s Southern Alps Region), a field laboratory site prone to rockfalls. Six measurements were conducted at shallow depths from the surface, moving deeper along a sub-horizontal borehole. The experiment was conducted in heterogeneous and anisotropic gneiss, with the overcored rock elastic properties, as evaluated by biaxial and uniaxial tests, being widely scattered. Since stress calculations are sensitive to all input data uncertainties, strain inversion was, thus, performed using an experimental device and Monte Carlo simulations. The experimental device allows the assessment of rather broad confidence intervals for both stress magnitude and orientation. The results indicate that the stress state in the surface area is quite heterogeneous and may be correlated with topography. The measurements show a nonlinear stress distribution with distance to the free surface, along with high values of principal stresses, despite the vicinity of the surface. Although influenced by local topography, orientations of the principal computed stresses are characterized by a high turnover due to local heterogeneities. The results are roughly in accordance to a 2D finite element model of the site.  相似文献   

分体式不提钻钻孔压水试验孔口装置的研发与应用          下载免费PDF全文

聂新明 《探矿工程》2019,46(3):51-56

在钻探施工过程中,由于工程要求,必须对钻孔做孔口压水试验,根据钻孔吸水量、压力数据,检验钻孔的漏失及其他情况。传统孔口压水试验使用的孔口装置,必须把孔内钻具提出孔外,严重地影响工程施工进度。分体式不提钻钻孔压水试验孔口装置的研发,可在不提钻的情况下完成孔口压水试验作业,大幅度缩短施工工期,减轻工人的劳动强度,减少安全事故的发生,对钻探工程施工具有一定的经济价值和现实意义。本文详细介绍了研制的分体式不提钻钻孔压水试验孔口装置的结构、工作原理及使用方法,并与传统孔口压水装置进行了试验对比,验证了分体式不提钻孔口压水试验孔口装置工作的可靠性及优势。  相似文献